Hydraulic Security Arma Kontrol Road Blocker Barrier System 3.75KW 380V 50Hz

Road blocker Model number: SST5000-3M
1. System power: 3.75KW；
2. Power unit: electro-hydraulic drive；
3. PLC built-in encryption system: it can be encrypted；
4. Rising time: ≤1-4S； 5. Rated voltage: AC380V 50Hz；

• 1 Digging foundation pit:

  Dig the foundation pit according to the overall dimensions of the product. The dimensions of the foundation pit are；

  Length: according to the actual length of roadblock machine +400mm;

  Width: 1500mm;

  Depth: 1000mm (including 240mm cushion).

• do cushion:

  240mm cushion shall be made at the bottom of foundation pit, and the cushion shall be poured with concrete with C25 grade or above, with 110 mm diameter PVC pipe as drainage pipe in the middle, which shall be connected to reservoir or sewer, and the cushion shall be paved and compacted to prevent the equipment from sinking.

  2.3 Installation wiring:

  After the cushion layer is hardened, hoist the roadblock machine into the foundation pit with lifting equipment to ensure that the roadblock machine panel is flush with the ground; The hydraulic station and the controller shall be fixed according to the site conditions, and the oil pipe shall be extended to the hydraulic station according to the site size, and the LED light wire shall be connected to the controller. PVC pipes shall be sleeved outside the oil pipe and the light wire. See 2.3 Installation Wiring Diagram for details.

  2.4 Equipment debugging:

  The controller is connected to 380V three-phase power supply, the hydraulic station is filled with hydraulic oil, and the power-on test is started to ensure that the motor rotates clockwise (if it is counterclockwise, the power is cut off immediately, and any two motors are replaced until the motor rotates clockwise); Then test the functions of ascending, descending and stopping, and finally test the functions of ascending pedal and descending pressure relief valve when power is cut off.