Anti-Terrorism and Anti-Collision Barrier Gate — Technical Specifications
The Anti-Terrorism and Anti-Collision Barrier Gate is a pre-embedded, electro-hydraulic security barrier designed for vehicle access control and anti-terrorism protection at high-security entry points.
How it works: The gate body is installed flush with the road surface inside a pre-cast concrete pit. On command, the hydraulic system raises the barrier to block unauthorized vehicles; after passage, it lowers back to surface level. Because the frame is anchored by a reinforced concrete foundation (C25, 240 mm base layer), the main body remains immovable under collision, absorbing and deflecting impact energy.
Core specifications
表格
| Parameter | Specification |
|---|---|
| System control | Electro-hydraulic |
| Passing capacity | 120+ ton container trucks |
| Power supply | Three-phase 380 V (control 24 V) |
| Drive power | 3.7 kW |
| Rise / fall time | ≤ 3 s (adjustable) |
| Working temperature | -35°C to 75°C |
| Body material | A3 steel, 16 mm, anti-rust primer |
| Unit weight | Approx. 1.5 tons |
| Protection rating | IP68 |
| Standard lengths | 2.5 m – 6 m (custom available) |
| Remote control | 30 m range, rolling code anti-interference |
Hydraulic system: 3HP×4P industrial motor, gear pump, heavy-duty cylinder HOB63-200CA+I (200 mm stroke), 60 L oil tank, dual-circuit manual pump, PT-standard 1/2" double-layer steel-wire high-pressure hoses.
Control system: Imported U.S. PLC chip, industrial power supply (-28°C to 85°C), configurable display text (company name, address, contact), 30 m rolling-code remote.
Installation: Ground pit per model size, 240 mm concrete bedding, drainage channel (150×200 mm), cable laid in 110# PVC conduit, C25 concrete backfill, road surface restoration. Optional human/electric pump-out or natural drainage modes.
![]()
Contact Person: Mr. Sales1
Tel: +8618938884618